eBay Classifieds » All ads » Cars & vehicles » 

Parts & accessories in Northeast Ohio

(1-24 of 301 ads)
View as:
Categories
Price [clear]
$ to
    Ads
    1. 67 68 69 70 Mustang Ford 9 inch left side axle shaft 28 spline

      for sale is an original stock OEM 1967-70 Mustang Ford 9 inch 28 spline axle shaft, stock 4.5" inch bolt pattern, this is the left short side axle measuring 25 5/8" inches from face of the axle to the end of the splines, $60, will ship UPS at buyer's expense, call (330)-784-6088, thanks for looking!

    2. Ford NOS Ranger steering wheel # F87Z-3600-AAD

      have new in the box Ford Ranger steering wheel, fits 1997 and others? without cruise control, replace your worn smooth or damaged steering wheel with this NEW OEM part, # F87Z-3600-AAD , $45, call (330)-784-6088, thanks for looking!!!

    3. Vintage Dual point Tach drive Ford FE big block distributors

      for sale are some old vintage dual point performance tach drive distributors for the FE big block 390 & 427 engines, neither have caps as pictured for $85 each your choice or buy both at the same time for $150 as pictured, will ship in the US only at buyer's expense, NO Pay Pal or credit cards, thanks for looking!! call (33O)-784-6O88..

    4. OEM ford 9 inch 275 ratio ring and pinion gear set

      for sale is a good original set of ford 9 inch 2.75 ratio ring and pinion gears, $50, will ship at buyer's expense, call (330)-784-6088..

    5. OEM Mopar 8 3/4 B-body 30 spline axle shafts

      for sale is an original set of OEM Mopar B-body 8 3/4" 30 spline axle shafts with the stock 4.5" inch bolt pattern, $85 for the pair, NO credit cards or Pay Pal, will ship at buyer's expense, call (330)-784**6088, thanks!!

    6. Original Ford DOZE-B five blade fan for 1970 Boss 302 Mustang

      for sale is an original Ford DOZE-B five blade flex fan for a 1969-70 Boss 302 Mustang application , $145 as pictured, decent condition with the paint needing stripped and refinished, it appears to be without any noticeable defects, date code is "C 7 0" correct for a 70 Boss car, I will ship at buyer's expense in the US only, NO Pay Pal or credit cards, thanks for looking! call (33O)-784-6O88..

    7. 2003 BMW smog/air pump

      This is a brand new smog/air pump for 2003 BMW 325xi. I'm not sure what other models it will work on, but that is up to you to find out. It is damaged, but quite an easy fix I feel that could be remedied by some adhesive bonder/glue. The part where the hose hooks to was broke off when I received it from the parts supplier...it's a clean break that could easily be bonded back together. It ...

    8. Ford toploader 4 speed C4AR main case with original HEH-G id tag

      for sale is an original ford toploader four speed C4AR main case. This is a bare case with no internals and no apparent damage. It still has its original HEH-G id tag for an early Mustang 260 / 289 application with a narrow pattern bellhousing. This case can also be used with other toploader applications needing this early case such as a 64 Galaxie , Falcon or Fairlane, $125 as pictured, ...

    9. Used Black Yamaha OEM factory steel rims wheels 12x7 12x9

      3 used rims from a 2006 Yamaha Kodiak. Should fit many other Yamaha models and possibly other makes. Rolled edges have some dents. 2 front 1 rear. Will sell single rear if set not wanted. This ad was posted with the eBay Classifieds mobile app.

    10. USED ATV PWC parts, tires, for Honda Polaris Suzuki Sea Doo Yamaha

      I own a small ATV repair shop and I have several good used parts for the following vehicles. Call, or E-mail me if you are looking for a particular part. Al. Discounts on new OEM and aftermarket parts as well. Visit www.offroadmechanics.com for more info. -1986 Honda XR600 -1987 Yamaha YFM350X Warrior (no engine) -1988 Polaris Trail Boss 250 4x4 (Model # W888127) -1989 Polaris Trail Boss ...

    11. 1970-73 Mustang right side DOAE Cleveland 4V barrel exhaust manifold

      for sale is an original OEM Ford right sight (passenger) side 351 Cleveland 4V barrel exhaust manifold for a 1970-73 Mustang application.

    12. 68-70 Ford Mustang bare 9" inch rearend housings

      available are a couple 68-70 Mustang 9 inch rearend housings, priced from $175 each bare housing, pairs of 28 spline axle shafts for these housings are also available at additional cost for $100 each pair, will offer individual 28 spline axle shafts for $70 each, also have a never used set of aftermarket Moser brand 31 spline axles for this application for $250, call (33O)-784-6O88, thanks ...

    13. Mopar / Chrysler 833 C97728 four speed overdrive input retainer 5.125

      For sale is an original Mopar / Chrysler input retainer # C97728 from a late 70's four speed 833 overdrive transmission, 5.125" diameter, average used condition, $35 as pictured, I will ship in the US only at buyer's expense, NO Pay Pal or credit cards, thanks for looking!!

    14. Mustang II / Pinto V8 rearend housing and axles with backing plates

      For sale is an original 1975-78 Mustang II / Pinto V8 Ford 8 inch rearend housing, stock 4 lug 28 spline axles, with backing plates and stock OEM drums, NO centersection. This set up came from California and is in very clean condition with the original brake lines, $135 with local pick up in NE Ohio only, thanks!

    15. 1967-68 Chevy SBC factory # 3917610 high rise winters aluminum intake

      for sale is an original GM winters # 3917610 cast aluminum high rise four barrel intake manifold for a small block 1967-68 Z28 performance engine, as pulled from an original engine and it will need cleaned up, $450 as pictured. I will ship at buyer's expense in the US only, no pay pal or credit cards, thanks for looking!

    16. original Ford toploader 3 speed shifter boxes

      for sale are some original OEM Ford toploader 3 speed shifter boxes, these have NOT been cleaned up or restored in any way, as pulled from various top loader transmissions over the years, $35 each box your choice, NO credit cards or Pay Pal, shipping is as buyer's expense in the US only, call (33O)-784**6O88, thanks!!

    17. original OEM GM Chevy 10 bolt 8.5 pinion yoke

      for sale is an original GM Chevy OEM 10 bolt 8.5" rear end pinion yoke, $25 as pictured, will ship at buyer's expense, NO pay pal or credit cards, call (33O)-784**6O88, thanks!

    18. Hurst shifter mounting plate 833 Mopar A-body # 1950090 / 195-0090

      For sale is an original OEM Hurst shifter mounting plate for a Mopar / Chrysler 833 four speed transmission for the various 1967-76 A-body transmissions, includes the 5 OEM bolts to mount the Hurst shifter, $45 as pictured, I will ship in the US only at buyer's expense, NO Pay Pal or credit cards, thanks for looking!

    19. SBC Chevy Weiand #8004 Dual Plane Intake & Quadrajet Carb

      Weiand #8004 SBC Dual plane intake Spread bore Aluminum Intake Manifold and Quadra Jet Rochester 7044502 R4-MV Carburetor; Small Block Chevrolet 283 305 307 327 350 400. --- $135

    20. Ford C3AA-6394-C V8 260 & 289 five bolt narrow pattern bellhousing

      for sale is an old original 1963-64 Ford Fairlane / Falcon V8 / early Hi Po Mustang 157 tooth aluminum bellhousing for a 260 & 289 five bolt block with the narrow pattern toploader or T10 four speed transmission, has the correct C3AA-6394-C part # with a 64 cast date, still dirty and greasy as removed many years ago from a 64 Fairlane 4 speed car, all bolt holes look good, $85 as pictured, ...

    21. 1962- 67 Chevy II Nova Parts

      call i have lots of parts. prices vary. 4 door , wagon and convertible parts cars! mostly 63-65 some 66 67. call 330 364 5217 or cell 330 987 6111. no calls after 9pm. thanks

    22. 1955-57 Chevy chevy doors deck lids and more parts

      i have a few parts for 55 -57 chevy . i have 4 - 2 door sedan doors $100 each, inner fenders $50.00 each and more. trunk lids nice $250 each and a lot of other parts .

    23. vintage 4 lug 15 inch western wheels NEW IN THE BOXES

      brand new with lugs and centers. 4 western wheel aluminum rims new in the boxes with center caps. 4 lug x 4 1/2 . style number 65-5644 1inch offset. never been mounted.

    24. Ford 8 inch 4.11 ratio posi center section NEW from Currie w/ Tru Trac

      For sale is a brand new Currie built Ford 8 inch posi centersection with 4.11 ratio ring and pinion gears, this unit has the top quality Eaton Tru Trac posi unit, FRESH unit that has never been installed or used, $875 as pictured, I will ship in the U.S. only at buyer's expense, NO Pay Pal or credit cards, thanks for looking!